Backscatter body scanner making a comeback
Unlike the radiation used in the millimeter-wave whole-body scanners currently used in airports, the radiation in backscatter X-ray scanners such as the Secure 1000 is ionizing.
Ionizing radiation can disrupt chemical bonds and, above certain exposure levels, has been shown to be associated with risks of cancer. However, “we live in a sea of radiation,” Hudson says, with natural sources of ionizing radiation including cosmic rays, bananas, and minerals that can appear in products such as cat litter. “So in order to assess relative risk, researchers need to accurately measure the exposures from such systems and compare those measurements to other exposures to ionizing radiation,” he continues.
For comparison, a person’s typical daily “effective whole-body dose” from natural sources is about 1,000 microrem (µrem) or, in SI units, 10 microSievert (µSv) — both units for measuring radiation absorbed dose. An airplane flight from New York to LA adds an extra 4,000 µrem (40 µSv) to a passenger’s daily dose. The 2012 NIST analysis indicated that the dosage from a single screening with the Secure 1000 scanner is 1.26 µrem plus or minus 0.08 µrem (12.6 nSv plus or minus 0.8 nSv).
All X-ray sources penetrate as well as scatter, or reflect, when they encounter tissue. Instead of collecting the transmitted X-rays as one would for a medical image, however, these scanners collect the X-rays that backscatter from the skin. Usually the machines collect two images, one from the front and one from behind.
The Rapiscan Secure 1000 is a single-pose system. To be scanned, a person stands between two units, each of which houses a moveable X-ray source that travels up or down inside the unit.
The X-rays from the source fly through a horizontal slit that produces a flat, fan-shaped beam, then encounter a spinning wheel with notched edges. The notches further reduce the output to a small, square beam of X-rays that scans the subject line by line like a fax machine. This “flying spot” of X-rays goes through clothing, bounces off skin, and is collected by a series of large-area X-ray detectors inside the scanner.
“It’s a really clever way to acquire a well-resolved image of an object or a person with very little exposure to radiation,” Hudson says. The X-ray “spot” spends only a few tens of microseconds on each part of the body. The resolution of the resulting image is determined by the size of the small spot, not that of the detectors whose large size simply helps to increase the sensitivity.
In their 2012 report, the NIST team used radiation detectors to create a 3-D exposure map showing levels of radiation in the inspection zone, the space between the two scanning units where a person would stand. Hudson and colleagues then used this exposure map to estimate how much dose a person would get to their whole body as well as individual organs, particularly the skin and eyes.
Unsurprisingly, the skin gets a higher dose of X-rays than an organ inside the body. However, Hudson says, skin is one of the least radiosensitive organs. The calculation of “effective dose” takes that into consideration to produce a number used by regulators to determine compliance with safety standards. Using three different approaches to estimate effective dose to various organs, NIST scientists found that these numbers are well within the limits recommended by the National Council on Radiation Protection and Measurements (NCRP) and the International Commission on Radiological Protection (ICRP). For example, it would take 465,340 scans in a year to reach the annual recommended limit for the skin and 139,602 scans to reach the recommended limit for the eye.
The NAS report is scheduled to be ready by end of the year or the beginning of 2015, Svedberg says. Meanwhile, NIST has re-assessed the measurement techniques and tools that researchers have been using to measure a rastered source of X-rays like that used in the backscatter technique. It is tricky to extrapolate the dose levels as a function of distance produced by the various implementations of X-ray backscatter systems, Hudson explains, because the X-ray sources aren’t stationary; instead, they are spatially translating and in some cases also rotating throughout a scan.
“If you want to compare studies measuring the radiation levels of such machines, you need to be able to correctly extrapolate to different stand-off distances to see if results are consistent,” Hudson says. “This has not been widely appreciated in the studies published so far and has been one source of confusion.”
In a forthcoming article in the Journal of Research of NIST, Hudson and colleagues conclude that the tools commonly used in radiation dosimetry, if properly applied and interpreted, are entirely adequate to determine radiation levels and rates for security-screening systems that employ the backscatter method. He explains, however, that neither the measurements of NIST nor the NAS team are intended to assess the safety of backscatter X-ray scanners directly.
“NIST is not in the business of declaring such systems safe or unsafe,” Hudson says. “Our role is to inform the public debate by measuring the exposure levels absolutely, validating the measurement tools and methods, and assessing the uncertainties.”
— Read more J. L. Glover et al., Assessment of the Rapiscan Secure 1000 Single Pose (ATR version) for Conformance with National Radiological Safety Standards (NIST report for the TSA, inter-agency agreement HSHQDC-11-X-00585, 28 September 2012)
